Wall capping profiles
Wall capping profiles, in particular, with a coloured coating, contribute to the overall architectural impression of a façade. In addition, they also form part of the roof waterproofing.
alwitra wall capping profiles:
- industrially produced ready-to-install profile series (MAG, MAK) for all types of roof waterproofing (synthetic membranes or bituminous sheets)
- made of aluminium, lightweight and noncorrosive, recyclable, with synthetic coating, if required
- compliant with standards and directives
- for straight or crescent-shaped roof edges with upstands (parapet)
- with not accentuated rain-proof joints
- ready-to-install external/internal corners and other preformed details
- for simple and time-saving installation
alwitra wall capping profiles form part of a comprehensive system for smart roof waterproofing solutions.
- one-piece bent aluminium profile
- front face heights: 75, 100, 125, 150 mm
- back face heights: 60, 100, 125, 150 mm
- variable crown width
- with front face upstand (MAG-6)
- without front face upstand (MAG-4)
- one-piece bent aluminium profile
- variable front face height from 75 to 300 mm
- variable crown width
- back face height 40 or 47 mm
- with or without front face upstand
- one-piece bent aluminium profile
- front face heights:
- MAK-5: 60, 100, 125, 150 mm
- MAK-5.1: 47 mm
- MAK-5.2: 40 mm
- variable crown width
Overview of important downloads
Array
(
[_wpcf_belongs_page_id] => Array
(
[0] => 2176
)
[_wpcf_belongs_downloads-type_id] => Array
(
[0] => 30471
)
[_cmplz_scanned_post] => Array
(
[0] => 1
)
[wpcf-order] => Array
(
[0] => 1
)
)
Array
(
[_wpcf_belongs_page_id] => Array
(
[0] => 2176
)
[_wpcf_belongs_downloads-type_id] => Array
(
[0] => 19867
)
[wpcf-order] => Array
(
[0] => 4
)
[_cmplz_scanned_post] => Array
(
[0] => 1
)
)
